Skip to content
CoverMatch
INDUSTRY CHECKLIST · CHIMNEY REPAIR CONTRACTORS

The chimney repair contractor insurance checklist

QUICK ANSWER

Chimney repair contractors usually carry general liability, workers' compensation and commercial auto. Chimney repair contractors work on the highest and most exposed part of a house, reline flues that carry fire and carbon monoxide, and get the call when water or smoke shows up inside months after the job. The property manager and the permit office ask for proof of each. The checklist below covers who asks and how to check what you have.

Reviewed by Michael LaBarbera, Licensed property & casualty agent, Provident Financial Group · Reviewed Oct 12, 2026 Updated
Coverage scoreA chimney repair contractor with the right wallet
General LiabilityRenews in 47d
Workers' CompensationLive cert ✓
Commercial AutoCan switch
CoverMatch Your general liability renews in 41 days. Want it shopped before the property manager asks for the new certificate?
YOUR CHECKLIST

Tick what you already have

The score updates as you go. Save it and the wallet remembers.

Checklist score7 lines still open

Who asks a chimney repair contractor for what

Who What they usually want to see
Property managers & HOAs General liability with the manager and owner as additional insureds, and workers' compensation
Cities, counties & permits General liability, auto and workers' compensation at the limits in the permit or contract
Banks, lenders & SBA loans Property or auto physical damage with the lender as loss payee, and liability proof at closing and every renewal

Each of them wants a certificate, and most want it again at every renewal. A live certificate link from the wallet shows today's coverage to every holder and tells them when it changes.

How to check what you already have

  1. General liability declarations page. Three liability numbers matter: each occurrence, general aggregate and the products–completed operations aggregate. Then the forms list: blanket additional insured, waiver of subrogation and primary and non-contributory wording satisfy every contract; scheduled forms satisfy one.
  2. Workers' compensation information page. Item 3.A must list every state you work in, item 4 must carry the right class codes, and the employers' liability limits should meet what contracts ask. Check that the estimated payroll is close to this year's.
  3. Auto schedule. Every vehicle listed with the right garaging address and use; symbols that include hired and non-owned auto; physical damage with the lender as loss payee where the vehicle is financed.
  4. Equipment schedule. Owned items scheduled above the per-item threshold, a blanket limit for small tools, leased or rented equipment included, and the valuation (replacement cost or actual cash value).
  5. Umbrella schedule of underlying insurance. Each primary policy listed with the limits the umbrella expects; a gap between the two is uninsured.
  6. Bonds. The obligee (board, municipality or owner), the penal sum and the expiry date; a bond is renewed with the licence or the job, not with the policy year.
  7. Hired and non-owned auto. Look for the symbols 8 and 9 or an endorsement by that name on the auto or general liability policy; without it, staff in their own cars are uninsured on company business.

What usually goes wrong for chimney repair contractors

  • A house fire traced to a flue liner installed years earlier, the completed-operations claim of the trade.
  • Eaves line work under a policy that was never told about the height.
  • Damage to the exact thing you are working on is excluded on most general liability forms; installation floaters and care, custody and control endorsements fill that hole.
  • A completed-operations aggregate quietly limited by endorsement; the declarations page looks fine until the forms are read.
  • Theft from a locked truck overnight with no tools floater, or a per-item limit lower than the one tool that mattered.
  • A personal auto policy on a truck with the company name on the door.

What underwriters will ask a chimney repair contractor

  • The share of relining and rebuilding versus caps and crowns, maximum height, and whether certifications are held
  • Residential versus commercial split of the work
  • Whether any work is done above three stories or below grade
  • Years of completed-operations coverage with no gap
  • Whether you warranty your work and for how long
  • Total value of hand and power tools kept on the trucks

Have the answers in the wallet before the renewal and the quote request fills itself in; CoverMatch sends one application to every eligible carrier and lines the quotes up against what you have.

Renewal timing

Audits at year end compare payroll, receipts and subcontractor costs with the estimate, so keep the wallet's size figures and the subcontractor certificates current. Start comparing sixty days before expiration, and ask for the limits the next contract will need rather than the ones the last one did.

Questions people actually ask

Is a chimney fire after our liner work covered?

As a completed-operations claim, when the policy in force includes completed operations and the liner was installed to the listing. Keep the manufacturer's listing, the inspection photographs and the invoice together; they are the defence when the fire investigator calls.

Why does the carrier ask about the height?

Because the work is at the eaves line and the fall exposure is the same as any trade working at the top of a building. Describe the heights honestly; a policy rated for ground-level masonry can be contested on a fall from a chimney at height.

Does general liability cover damage to a customer's property while I work on it?

It covers damage to the rest of their property, not usually the part in your hands. Many forms exclude property in your care, custody or control, so a chimney repair contractor that handles valuable items or systems needs an endorsement or an installation floater. The policy explainer in the wallet flags the exclusion when it reads your policy.

A job I finished two years ago just caused damage. Which policy pays?

The general liability policy in force when the damage happens, as long as it still includes completed operations and you kept the coverage continuous. A gap or a switch to a form that excludes completed operations is how a chimney repair contractor ends up uninsured for old work.

Are tools stolen from my truck covered?

Under a tools floater, yes, subject to the deductible and any per-item limit. Under the commercial auto policy, no: auto covers the vehicle, not what was in it.

MANAGE IT IN THE APP

Every policy, renewal and live certificate in one wallet.

Scan a dec page and the card appears. Share a live certificate link that updates itself. Get matched when a renewal comes around.

Keep reading